> Products > Ball valves for process service

Model KHL Series 510, Process Ball Valves
Flanged Ends, Floating Ball
1/2" to 6", ANSI 150# to 300#
DN 15 to DN 150, PN 10 to PN 40
1. ISO 5211 Actuator Mounting Flange
2. Adjustable Stem Nut
3. Lock Washer
4. Live Loading
5. Stem Bushing
6. Packing (Helium Proof <10^-8m bar l s^-1· m^-1)
7. Antistatic
8. Full Supported Middle Flange Sealing
9. Anti-Blow Out & Double "D" Stem Design
10. Full Supported PTFE+25%GF Seat Ring
(optional PEEK, PTFE virgin, PTFE+50%SS, PTFE+33%Carbon, Carbon Graphite)

KHL 510 -DIN EN- PN 10-40 -PFTE.pdf
KHL 510 -DIN EN- PN 10-40 -Graphite.pdf
KHL 510 -ANSI- 150 -PTFE.pdf
KHL 510 -ANSI- 150 -Graphite.pdf
KHL 510 -ANSI- 300 -PTFE.pdf
KHL 510 -ANSI- 300 -Graphite.pdf

Model KHX Series 540, Isolator Ball Valves
Flanged Ends, Floating Ball
DN 25 to DN 100,  PN 10 to PN 40
1. Square Stem acc. to ISO 5211
2. Adjustable Stem Nut
3. Live Loading
4. Stem Bushing
5. Antistatic
6. Packing (Helium Proof <10^-8m bar l s^-1· m^-1)
7. Full Supported Sealing, Torque limited
8. Anti-Blow Out Stem Design
9. Full Supported PTFE+25%GF Seat Ring
Optional available top flange according to ISO 5211 for direct actuator assembly.

KHX 540 -DIN EN- PN 10-40 -PTFE.pdf

Torque Limiter of Stem Nut
prevents packing damage from
over tightening